Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 55 / 59

43
Densité 3+ FR4
User Manual
5 With the lever extended, slide the new controller gently into the controller slot as far as you
can until it stops. Do not apply any force, as it may damage the controller/display interface.
6 Firmly push the lever up to seat the card in its connectors.
7 Close the front door of the frame
Replacing the Frame Ventilation Fans
In case of failure of one of the two cooling fans assemblies on the rear of the frame, replace it
according to the following steps.
1 Procure a replacement fan assembly from
Grass Valley. It is comprised of a three
fans in a housing. It is available from
Grass Valley as part #03007-2100-100.
2 Remove the defective fan from the frame:
• Remove the two screws (top left and bottom right corners)that secure the fan assembly
to the frame and pull the fan assembly straight out of the frame.
• Retain the screws, as they will be used to install the replacement fan assembly.
3 Install the replacement fan:
• Slide the new fan assembly into the opening on the rear panel, pushing it straight in and
ensuring that the connector on the assembly mates with the socket in the frame.