Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 36 / 59

24
Configuration
For manual operation:
iControl - click the Restore Point button and view the Cards tab.
The tab show a list of the slots available in the
Densité frame, with a check box, name, and
status box for each.
Click the check box to activate the Data
Restore feature for the card in that slot,
-or-
Click the Select All box at the top to activate
the feature for all slots in the frame.
Click Save to controller at the bottom to
copy all restorable data from the cards in the
selected slots into the memory on board the
CPU-ETH3 controller.
Click Load to cards to load the cards in the
selected slots with data from the controller’s
memory.
Note that a data restore will only work if the
card in the slot is the same type as the card that was there when the data was saved.
For automatic restore and save:
iControl - click the Restore Point button and view the Config tab.
Restore: The CPU-ETH3 card can be set up to automatically update a card when it is inserted in
a slot previously occupied by a card of the same type whose data was saved. Thus, a new card
can be configured automatically to replace the card that was removed, saving a lot of time when
cards are swapped.
Click the Default Action box to enable the auto restore function for all the cards in the frame.