Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 31 / 59

19
Densité 3+ FR4
User Manual
Remove: select one of the services listed in the window by clicking on it, and click Remove
to open a query box allowing you to delete it from the window.
Using the menu
None of this data can be accessed via the local control panel menu, except to read the Firmware
version.
Status Monitoring
The CPU-ETH3 controller continuously monitors the operating condition and status of the
housing frame’s power supplies and ventilating fans. It also monitors the status and usage of its
two ethernet ports, and the status of its on-board memory, as well as the data throughput of all
cards installed in the frame.
In addition to the information displayed on the Controller Status Indicator (see page 16), status
information acquired by the controller can be viewed in the iControl interface, and on the local
controller display through the menu.
The iControl interface always displays two icons in the upper left of the window. These report
the status of the two power supplies.
Icon Messages
Power supply 1 voltage: OK
Power supply 2 voltage: OK
Power supply 1 voltage: Absent
Power supply 2 voltage: Absent
Power supply 1 voltage: Error
Power supply 2 voltage: Error
The table shows the possible icon displays and the associated messages that appear below
them. Error messages are always displayed; other status messages appear only upon mouse-
over of the icon.
The Status panel shows status information in four categories, each accessed by clicking the
appropriate tab.