2122.6-0000010 OM
16
End of table 1.1
Parameter
(specification) designation
Parameter value for tractor
“BELARUS -2122.6”
19 Hydraulic system:
а
) pump displacement under crankshaft
rated speed, l/min, at least
b) safety valve operating pressure,
М
P
а
c) nominal volume factor, at least
0 to 87
20,5±0,5
0,75
20 Operating equipment:
а
) rear power take-off shaft:
In subsection 3.2.7 “PTO use”
b) front power take-off shaft:
In subsection 3.2.7 “PTO use”
c) rear lift linkage:
1) load-lifting capacity of rear lift linkage on
the suspension axle, kg, at least
6500
2) rear lift linkage lifting time from lower-
most to uppermost position with test load
on the suspension axle, s, at least
5
d) drawbar hitch:
In section 4 “Coupling of implements”
_____________________________________________________________________
________________________________________
1)
Engine parameters, not specified in table 1.2.1, shall comply with 260 S4 – 0000100
OM document.
2)
For referential use.
3)
With FLL and ballast mounted.
4)
To be specified depending on configuration.
https://tractormanualz.com/
