Beko BEVPA 090, Руководство пользователя, Страница: 31 / 220

Split type wall mounted air-conditioner / Owner’s Manual 31 / 220 EN
• Ensure the secure installation regardless of what type of wall on which it is installed, to prevent
potential dropping that could hurt people.
7.6 Electrical safety requirements
• Be sure to use the rated voltage and air conditioners dedicated circuit for the power supply, and the
power cord diameter must meet the national requirements.
• When the maximum current of air conditioner is ≥ 16A, it must use the air switch or leakage
protection switch equipped with protection devices.
• The normal operating range is 90%-110% of the local rated voltage.
• The minimum clearance between the air conditioner and the combustibles is 1.5 m.
• The interconnection cord connect the indoor and outdoor units. You must first choose the right cable
size before preparing it for connection.
• Cable types: Outdoor power cord: H07RN-F or H05RN-F; Power cable: H07RN-F or H05RN-F;
• Minimum cross-sectional area of power and power cables
North america Other regions
Appliance
amps(A)
AWG
Rated current of
appliance (A)
Nominal cross-sectional
area (mm
2
)
10 18 > 3 and ≤ 6 0.75
13 16 > 6 and ≤ 10 1
18 14 > 10 and ≤ 16 1.5
25 12 > 16 and ≤ 25 2.5
30 10 > 25 and ≤ 32 4
40 8 > 32 and ≤ 40 6
• The size of the interconnection cord, power cable, fuse, and switch needed is determined by the
maximum current of the unit. The maximum current is indicated on the nameplate located on the
side panel of the unit. Refer to this nameplate to choose the right cable, fuse, or switch.
C
Note: Core number of cable refer to the detailed wiring diagram adhered on the unit
which you purchased.
7 Notices for installation