Beko BEVPA 090, Руководство пользователя, Страница: 18 / 220

18 / 220 EN Split type wall mounted air-conditioner / Owner’s Manual
3.1 The conditions of unit can’t normally run
• Within the temperature range provided in following table, the air conditioner may stop running and
other anomalies may arise.
Cooling
Outdoor
> 43 ° C (Apply to T1)
> 52 ° C (Apply to T3)
Indoor < 18 ° C
Heating
Outdoor
> 24 ° C
< -7 ° C
Indoor > 27 ° C
• When the temperature is too high, the air conditioner may activate the automatic protection device,
so that the air conditioner could be shut down.
• When the temperature is too low, the heat exchanger of the air conditioner may freeze, leading to
water leakage or other malfunction.
• In long-term cooling or dehumidification with a relative humidity of above 80% (doors and windows
are open), there may be water condenses or dripping near the air outlet.
• T1 and T3 refer to ISO 5151.
3.2 Notes for heating
• The fan of the indoor unit will not start running immediately after the heating is started to avoid
blowing out cool air.
• When it is cold and wet outside, the outdoor unit will develop frost over the heat exchanger which
will compromise the heating capacity. This is when the air conditioner will start defrost.
• During defrost, the air conditioner will stop heating for about 5-12 minutes.
• Vapor may come out from the outdoor unit during defrost. This is not a malfunction, but a result of
fast defrost.
• Heating will resume after defrost is complete.
3.3 Notes for turning off
• When the air conditioner is turned off, the main controller will automatically decide whether to stop
immediately or after running for dozens of seconds with lower frequency and lower air speed.
3 Notices for use