Beko BEVPA 090, Руководство пользователя, Страница: 23 / 220

Split type wall mounted air-conditioner / Owner’s Manual 23 / 220 EN
5.2 Clean the air filter
• Remove the air filter
1. Use both hands to open the panel for an angle from both ends of the panel in accordance with the
direction of the arrow.
2. Release the air filter from the slot and remove it.
• Clean the air filter
Use a vacuum cleaner or water to rinse filter, and if the filter is very dirty (for example, with greasy
dirt), clean it with warm water (below 45 ° C) with mild detergent dissolved in, and then put the filter in
the shade to dry in the air.
5.3 Clean the air filter
• Mount the filter
1. Reinstall the dried filter in reverse order of removal, then cover and lock the panel.
5.4 Check before use
1. Check whether all the air inlets and outlets of the units are unblocked.
2. Check whether there is blocking in the water outlet of the drain pipe, and immediately clean it up if
any.
3. Check the ground wire is reliably grounded.
4. Check whether the remote control batteries are installed, and whether the power is sufficient.
5. Check whether there is damage in the mounting bracket of the outdoor unit, and if any, please
contact our local service center.
5 Clean and care