Beko BEKOKAT CC-360 Скачать руководство пользователя

Страница: 13 / 88

Installation and Operation Manual

BEKOKAT

V01 /11-046

13 / 88

WARNING

Fire



Adjust the fire extinguishing measures to the working environment.



Never use water in a full jet for safety reasons.



Wear a respiratory mask independent of ambient air.

DANGER

Excessive pressure / temperature



Suitable measures must be implemented to ensure that the

permissible operating pressure and operating temperature are not
exceeded on the plant.



It is the duty of the operating company to ensure that the connected

pressure generator is protected against exceeding the maximum
operating overpressure of 16 bar (g) and the temperature limits on
the

BEKOKAT



It must be ensured that the pressure generating compressor and the

compressed gas system are secured and safe.



Suitable measures must be implemented to ensure that the

permissible operating temperature is not inadvertently exceeded by
ambient conditions at the installation location.

CAUTION

Use of protective clothing

To prevent injuries to the feet and hands during transport of the

BEKOKAT

, the skilled technical personnel must wear sufficient

protective clothing and safety shoes

WARNING

Equipment to prevent dangerous conditions



The

BEKOKAT

must not be utilised as the sole means of averting

dangerous conditions on machinery and plants.



All machines and plants must be designed in such a way that

malfunctions or faulty conditions do not pose a danger to operation
personnel.

Содержание BEKOKAT CC-360

























































































Результаты поиска

Содержание BEKOKAT CC-360

Отзывы:

Похожие инструкции для BEKOKAT CC-360

Бренды по названию

Популярные бренды

Beko BEKOKAT CC-360, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BEKOKAT CC-360

Отзывы:

Похожие инструкции для BEKOKAT CC-360

Бренды по названию

Популярные бренды