BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
© BEKA 201 All
!
9
rights reserved
8
3.
Intended use
The device is only approved for the
or
.
industrial
commercial use
Only operate the device if it is installed in/at another machine and operated together with it.
Only lubricants which comply with the machine manufacturer's specifications may be conveyed.
The device must only be used according to the technical data (see chapter 1 „Technical data”). The
.
values may never exceed or fall below the values mentioned in the technical data. Never operate
the device without lubricant.
Unauthorized modifications
not permitted
of the device are
. BEKA is not liable for personal injury or damage of
machine resulting thereof.
The intended use also includes:
·
paying attention to all chapters and notes in the operating and assembly manual.
·
carrying out all maintenance work.
·
observing
work safety
accident prevention
all relevant instructions for
and
during all life cycles of the device.
·
having the necessary professional training and authorization of your company to operate the device and to carry out
the necessary work on the device.
Another use or a use beyond this scope is deemed improper.
4.
Scope of warranty
Warranties regarding operational safety, reliability and performance will only be granted by the manufacturer if the device
is used according to the regulations and under the following conditions:
·
Assembly, connection and maintenance are only carried out by authorized and qualified staff.
·
The device is only used according to the operating and assembly manual.
·
Never exceed or fall below the limit values as defined in the technical data.
·
Modifications and repairs at the device may only be done by BEKA.
Guaranty and warranty will expire for any damage of the device caused by improper lubricant (e.g.
wear of piston, piston jamming, blockades, brittled sealings etc.).
BEKA will generally not accept guaranty claims for any damage caused by lubricants, even though
those have been laboratory tested and released by BEKA, as such damage (e.g. by over-stored or
incorrectly stored lubricants, batch fluctuations, etc.) cannot be verified or reconstructed later.
Caution!
Caution!
Caution!
