BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
© BEKA 201 All
!
9
rights reserved
50
E)
Put the protective housing (pos. 1, see fig. 57) on the pump housing (pos. 2, see fig. 57) and screw the hexagon
socket head cap screws (pos. 3, see fig. 57) back in.
Make sure that the
(pos. 4, see fig. 57) is not
; otherwise
can enter into
flat gasket
damaged
water
the integrated control unit and can
it!
destroy
Fig. 57:
F)
Tighten the hexagon socket head cap screws (pos. 3, see fig. 57) with a tightening torque of approx. 2.5 Nm and
reconnect the device to the power supply (pos. 5, see fig. 57).
Caution!
2
1
3
4
5
