© BEKA 201
!
9 All rights reserved
BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
7
Check the surface temperature of the device as a possible heat transfer bears the
. Wear heat
risk of burns
resistant protective gloves!
Open flame and fire are strictly forbidden
during maintenance, inspection and repair due to fire hazard.
2.6
Unauthorized modification and production of spare parts
Modification, repair and alterations of the device are only accepted after manufacturer feedback.
Original
spare parts
safety.
and authorized accessories from the manufacturer contribute to
The use of other parts
can result in the loss of any liabilities for the resulting consequences. BEKA does not assume liability for parts
that are retrofit by the operator.
2.7
Inadmissible modes of operation
Operational safety of the device is only guaranteed when it is appropriately applied as indicated in the operating and
assembly manual. Never exceed or fall below the limit values, as stated in the technical data.
2.8
Electrostatic discharge
Avoid electrostatic discharge! There are electronic components integrated into the devices which might be
destroyed by electrostatic discharge. Observe the safety precautions against electrostatic discharge
according to DIN EN 61340-5-1/-3. Ensure that the environment (persons, workplace and packing) is well
grounded when handling these devices.
2.9
General hazard warning – residual risk
All components are designed according to valid regulations for the construction of technical systems with
regard to operational safety and accident prevention. Nevertheless, their use can lead to hazards for the user
or third parties as well as other technical facilities. Therefore, the device may only fulfill its intended purpose in
a
. This has to happen in adherence to the relevant safety
technically perfect and faultless condition
regulations as well as the operating and assembly manual.
the device and its attachment parts
Inspect
regularly
check
damage
leakages. Liquids
escape under high pressure
and
them for possible
or
could
from pressurized components which become
leaky.
