3-5
Operation
Setting RCF
Action
Result
1. Press [
RCF
].
The last digit on the
SPEED
display flashes.
2. Press [
S
] or [
T
]
until
the required RCF appears,
then press [
ENTER
].
The corresponding rpm will be automatically calculated and the
centrifuge will run at the calculated speed. You can check the RCF
during the run by pressing [
RCF
] while the centrifuge is running.
SETTING RUN TIME
You can set run time up to 9 hours and 59 minutes.
Action
Result
1. Press [
TIME
].
The last digit on the
TIME
display flashes.
2. Press [
S
] or [
T
]
until
the required time appears,
then press [
ENTER
].
•
Timed run—
set a time between 1 minute and 9 hours, 59 minutes.
If you enter a number between 59 and 99 minutes, the centrifuge
automatically recalculates the time in hours and minutes.
•
Continuous—
set a time below 0 or above 9:59.
SETTING RUN TEMPERATURE
You can set run temperature from –20 to +40°C. If no value is
entered, the centrifuge automatically selects the last entered tempera-
ture. (If all previous entries have been cleared, 25°C is selected as the
operating temperature.)
SPEED