manualshive.com logo in svg

Beckman Coulter Allegra 25R, Инструкция по эксплуатации, Страница: 22 / 56

Поделиться
Скачать
Beckman Coulter Allegra 25R Скачать руководство пользователя страница 22

1-8

Description

SPECIFICATIONS

Only values with tolerances or limits are guaranteed data. Values 
without tolerances are informative data, without guarantee.

Speed

Set speed . . . . . . . . . . . . . . . . . . . .  to 15 000 rpm in 100-rpm increments
Speed control. . . . . . . . . . . . . . .  actual rotor speed, ±50 rpm of set speed
Speed display. . . . . . . . . . . . . .  actual rotor speed in 100-rpm increments

or in RCF (when selected)

Time

Set time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 9 hours 59 minutes

or continuous (hold)

Time display

Timed run  . . . . . . . . . . . . . . . . . . . . . . . .  indicates run time remaining
Continuous (hold) or pulse run . . . . . . . . . .  (

∞

) indicates elapsed time

Temperature

Set temperature . . . . . . . . . . . . . . . . . . . .   –20 to +40°C in 1° increments
Temperature control (after equilibration) . . . . .  ±2°C of set temperature
Temperature display (after equilibration) . . . . . . . .  chamber temperature 

in 1° increments

Ambient temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 35°C
Ambient temperature for optimum operation . . . . . . . . . . .  23°C (±2°C)

Humidity restrictions. . . . . . . . . . . . . . . . . . . . . . . .  <80% (noncondensing)
Acceleration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10 acceleration profiles
Deceleration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10 deceleration profiles
Dimensions

Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.0 cm (25.6 in.)
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68.5 cm (27.0 in.)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40.5 cm (16.0 in.)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   124.0 kg (273.4 lb)
Ventilation clearances (sides and rear)  . . . . . . . . . . . . . . . . . 7.6 cm (3.0 in.)
Finishes

Control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  coated polycarbonate
Housing surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint

Electrical requirements

208-V, 60-Hz instrument . . . . . . . . . . . . . . . . 187–229 VAC, 16 A, 60 Hz
200-V, 50/60-Hz instrument . . . . . . . . . . .190–210 VAC, 16 A, 50/60 Hz
230-V, 50-Hz instrument . . . . . . . . . . . . . . . . 207–253 VAC, 13 A, 50 Hz

Electrical supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class I
Maximum heat dissipation into room under 
   steady-state conditions . . . . . . . . . . . . . . . . . . . . . . . 6824 Btu/hr (2.0 kW)
Noise level 0.91 m (3 ft) in front of centrifuge . . . . . . . . . . . . . . . .  

≤

68 dBa

Installation (overvoltage) category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  II
Pollution degree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2*
_____________

* Normally only nonconductive pollution occurs; occasionally, however, a temporary conduc-

tivity caused by condensation must be expected.

Содержание Allegra 25R

























































Отзывы:

Нет отзывов