manualshive.com logo in svg

Beckhoff EL7201-0010, Документация, Страница: 25 / 208

Поделиться
Скачать
Beckhoff EL7201-0010 Скачать руководство пользователя страница 25

Basics communication

Note

Startup list

Changes in the local CoE list of the terminal are lost if the terminal is replaced. If a terminal
is replaced with a new Beckhoff terminal, it will have the default settings. It is therefore ad-
visable to link all changes in the CoE list of an EtherCAT slave with the Startup list of the
slave, which is processed whenever the EtherCAT fieldbus is started. In this way a replace-
ment EtherCAT slave can automatically be parameterised with the specifications of the
user.

If EtherCAT slaves are used which are unable to store local CoE values permanently, the
Startup list must be used.

Recommended approach for manual modification of CoE parameters

• Make the required change in the System Manager

The values are stored locally in the EtherCAT slave

• If the value is to be stored permanently, enter it in the Startup list.

The order of the Startup entries is usually irrelevant.

Fig. 16: Startup list in the TwinCAT System Manager

The Startup list may already contain values that were configured by the System Manager based on the ESI
specifications. Additional application-specific entries can be created.

Online/offline list

While working with the TwinCAT System Manager, a distinction has to be made whether the EtherCAT
device is "available", i.e. switched on and linked via EtherCAT and therefore 

online

, or whether a

configuration is created 

offline

 without connected slaves.

In both cases a CoE list as shown in Fig. 

“’CoE online’ tab” 

is displayed. The connectivity is shown as offline/

online.

• If the slave is offline

◦ The offline list from the ESI file is displayed. In this case modifications are not meaningful or

possible.

◦ The configured status is shown under Identity.

◦ No firmware or hardware version is displayed, since these are features of the physical device.

◦

Offline

 is shown in red.

EL72x1-0010

25

Version: 2.0

Содержание EL7201-0010

















































































































































































































Отзывы:

Нет отзывов