manualshive.com logo in svg

Beckhoff EL7201-0010, Документация, Страница: 187 / 208

Поделиться
Скачать
Beckhoff EL7201-0010 Скачать руководство пользователя страница 187

Error correction

Fig. 174: 

DiagMessages in the CoE

The subindex of the latest 

DiagMessage

 can be read under x10F3:02.

Note

Support for commissioning

The DiagMessages system is to be used above all during the commissioning of the plant.
The diagnostic values e.g. in the StatusWord of the device (if available) are helpful for on-
line diagnosis during the subsequent continuous operation.

TwinCAT System Manager implementation

From TwinCAT 2.11 DiagMessages, if available, are displayed in the device’s own interface. Operation
(collection, confirmation) also takes place via this interface.

Fig. 175: 

Implementation of the DiagMessage system in the TwinCAT System Manager

The operating buttons (B) and the history read out (C) can be seen on the Diag History tab (A). The
components of the message:

• Info/Warning/Error

• Acknowledge flag (N = unconfirmed, Q = confirmed)

• Time stamp

• Text ID

• Plain text message according to ESI/XML data

The meanings of the buttons are self-explanatory.

EL72x1-0010

187

Version: 2.0

Содержание EL7201-0010

















































































































































































































Отзывы:

Нет отзывов