manualshive.com logo in svg

Beckhoff AX8911, Документация

Поделиться
Скачать
Beckhoff AX8911 Скачать руководство пользователя страница 50

Safe Motion functions

AX8911

50

Version: 1.2.0

SOS/SS2 with FB SLI

In the first solution, the stopping of the drive is monitored via the function block FB Envelope. If the standstill
has been reached, the input 

SLI

 of the FB SLI is set to 1 so that the current safe position is latched and

monitored for a parameterized positive and negative limit. If this position limit is violated, the output of the FB
SLI is switched off.

The output signal 

STO_SOS_Out

 of the FB OR is the logical OR of the delayed SOS signal (output on the

FB Envelope) and the SLIActive signal (output on the FB SLI). On a falling edge of the SOS signal, the
stopping of the drive and no violation of the envelope and target position, the 

STO_SOS_Out

 signal remains

TRUE and can be used for further processing in the safety application.

The order of execution of the function blocks must be kept (processing from left to right), so that

STO_SOS_Out

 does not change for a short time to FALSE in the transition from the falling edge at

SafeFunctionOut

 and the rising edge at 

SLIActive

.

Fig. 22: SOS/SS2 with FB SLI

SOS/SS2 with FB Limit

In the second solution, the stopping of the drive is monitored with a falling edge on the SOS input. If the
output of the FB Envelope changes to FALSE, there is no error and in addition the speed lies below the
speed limits defined in the FB Limit, the FB And output 

SOS_OK

 is set to TRUE. This signal can then be

incorporated in the further processing in the safety application.

 CAUTION

Minimum speed

Please note that in this solution a minimal movement of the axis below the speed values defined in the
function block FB Limit is possible. The machine manufacturer or user must consider this and decide
whether it could be dangerous.

Fig. 23: SOS/SS2 with FB Limit

Содержание AX8911


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды