manualshive.com logo in svg

Beckhoff AX8911, Документация

Поделиться
Скачать
Beckhoff AX8911 Скачать руководство пользователя страница 14

Product description

AX8911

14

Version: 1.2.0

Diagnostics / faults

 WARNING

Avoid line interruptions!

Line interruptions can lead to switch-off. The AX8911 can switch the motors of the AX8000 servo drive
torque-free according to the safety project used on it. Any motors that are still moving coast to a halt. With
suspended or pulling loads the motors may also accelerate. External safety measures (e.g. mechanical ser-
vice brakes) are to be provided by the user to avoid unwanted movements.

 WARNING

Avoid faults and interruptions in the EtherCAT communication!

Faults and interruptions in the EtherCAT communication lead to switch-off. The AX8911 can switch the mo-
tors of the AX8000 servo drive torque-free according to the safety project used on it. Any motors that are
still moving coast to a halt. With suspended loads the motors may even be accelerated. External safety
measures (e.g. mechanical service brakes) are to be provided by the user to avoid unwanted movements.

 WARNING

Activation or restart of a project in TwinCAT

The activation or restart of a project in TwinCAT can lead to switch-off. The AX8911 can switch the motors
of the AX8000 servo drive torque-free according to the safety project used on it. Any motors that are still
moving coast to a halt. With suspended loads the motors may even be accelerated. External safety mea-
sures (e.g. mechanical service brakes) are to be provided by the user to avoid unwanted movements.

 WARNING

Downloading the safety project to the TwinSAFE logic or the AX8911 can lead to switch-
off!

Downloading the safety project to the TwinSAFE logic or the AX8911 can lead to switch-off. The AX8911
switches the motors of the AX8000 servo drive torque-free. Any motors that are still moving coast to a halt.
With suspended or pulling loads the motors may also accelerate. External safety measures (e.g. mechani-
cal service brakes) are to be provided by the user to avoid unwanted movements.

Содержание AX8911


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды