manualshive.com logo in svg

Bay Networks 5380, Руководство пользователя

Поделиться
Скачать
Bay Networks 5380 Скачать руководство пользователя страница 18

 

Using Model 5380 Ethernet and Model 5580 Token Ring Routers

xviii

 

112768 Rev. B

 

 

 

Related Publications

 

For more information about using routers, refer to the latest versions of the 
following publications:

•

 

Quick Installation and Reference for the System 5000 Net Modules

 

 

•

 

Online Library

 

 (CD-ROM containing documentation for router software)

•

 

BayStream Online Library

 

 (CD-ROM containing documentation for 

BayStream software)

For more information about internetworking tools and network management, refer 
to the latest versions of the following publications:

 

•

Getting Started with Optivity Internetwork 6.1

•

Using Optivity Internetwork 6.1

 

•

 

Using Optivity Campus 6.0 for Windows

 

 

 

•

Using Optivity LAN for UNIX

 

For more information about using the System 5000 switched backbone product 
line, refer to the latest versions of the following publications:

 

•

Using the ATM Control Software 2.0

•

Using the Model 5780 ATM Router

•

Configuring System 5000 Cell-switched Networks 

•

Installation and Reference for the Model 5000 Chassis 

•

Bay Networks Guide to Understanding ATM 

 

Conventions

 

This section describes the conventions used in this guide.

 

Two-tiered Procedure Format

 

The procedural steps in this guide are presented in a two-tiered format. The first 
tier describes the step very briefly but precisely. An experienced user may need to 
read only the first tier to complete the task. The second tier describes the step in 
more detail and includes results of performing the step.

Содержание 5380



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды