7-7
7.2
Results Options
Figure 7-7. Results Options dialog box.
Peak Shape
This defines the shape of the curve. There are
instances when the default peak shape selection is
not appropriate: for example, when using
microelectrodes at low scan rates, as this produces a
sigmoidal plot for CV.
Half Peak Width
This defines the expected width of the peak (it may
be necessary to increase this value for broader
peaks).
Data Type
This defines how the experimental data is presented
when there is more than one presentation format
(i.e., BE, CA and CC). The default Data Types are
as follows: Current vs. Time (for CA) and Charge
vs. Time (for BE and CC).
Data Sets
This defines which data set is displayed when there
is more than one data set (i.e., CV, HR, OSWV,
OSWSV and TPTB). For CV, the number of Data
Sets is defined by the Number of Segments
(specified in General Parameters). OSWV,
OSWSV, and TPTB have Data Sets 1 to 3. The
number of Data Sets for HR depends on which
Data Sets were defined in General Parameters.
The default Data Sets are as follows: all segments
for CV, the first segment for OSWV, OSWSV and
