Baroness LM315GG, Руководство по эксплуатации для владельца

Страница: 69 / 75

Adjusting the Neutral Position of the
Piston Pump
Caution
Make sure not to touch rotating tires.
Caution
When adjusting the neutral position, pay
close attention to abrupt start of the machine.
Place the jacks beneath the jack-up points,
and then lift the machine until all the tires get
off the ground.
If the machine moves forward or backward while
the traveling pedals are released, they are not
set to the neutral position.
Follow the steps below to make adjustments.
Stop the engine.
Place the jacks beneath the jack-up points,
and then lift the machine off the ground.
(See "Jack-up Points" (Page 5-5) .)
Make sure that no tires get contact with the
jack stand.
Start the engine, and rev it up to the
maximum rpm.
Adjust the neutral position.
Loosen the lock nut.
Rotate the camshaft slowly until the front
wheel stops.
Find the position where the front wheel
stops and lock the camshaft with the nut.
1
2
hsn2jo-010
Adjusting the Neutral Position of the Piston Pump_001
1 Lock nut
2 Cam shaft
1.
2.
3.
4.
5.
[1]
[2]
Change of Fuse
Fuse Box
The fuse box includes spare fuses and tools.
1
pkm25s-008
Fuse Box_001
1 Fuse box
The machine uses a mini fuse for automobiles.
Replace an old fuse with a new fuse of the
specified capacity.
A B C D E
G F H I J
K
L
M
N
O
pkm25s-003
Fuse Box_002
A 5 A Glow lamp timer
B 5 A Key stop timer
C 5 A Glow lamp timer, glow lamp (thermo-start lamp)
D - -
E - -
F 15 A Engine stop solenoid
G 15 A Others
H 5 A Water temperature gauge, regulator
I - -
J - -
K 5 A
Spare
L 5 A
M 15 A
N 15 A
O Fuse removal tool
Maintenance
LM315GC
Maintenance
Page 5-15 Maintenance (Main Body)