manualshive.com logo in svg

Baroness LM315GG, Руководство по эксплуатации для владельца

Поделиться
Скачать
Baroness LM315GG Скачать руководство пользователя страница 67

In addition, if it is overtightened, it may wear
prematurely.
If necessary, adjust it, and always check the belt
for appropriate tension.

Fan Belt

Caution

Be sure to stop the engine before adjusting
the belts.

For details on handling the engine, please refer
to the separate Engine Handling Manual.
Open the hood.

Press the middle of the belt with your finger
to check the belt tension.
If the belt is too slack, loosen the nuts and
bolts fixing the alternator, and then move
the alternator to adjust the tension.

2

1

4

5

3

A

mzdn8n-002

Fan Belt_001

1

Fan belt

2

Blade

3

Alternator

4

Nut

5

Bolt

A

7.0 - 9.0 mm (0.276 - 0.354 in)

Reel Cutter Drive Belt

Caution

Be sure to stop the engine before adjusting
the belts.

Tilt the underseat cover forward and open
the cover.
Open the hood.
Press the middle of the belt with your finger
to check the belt tension.

1.

2.

1.

2.
3.

If the belt is too slack, loosen the bolts and
move the flexible wire housing (the pulley
attached) with the spanner to adjust the
tension.

2

3

1

eqhyge-001

Reel Cutter Drive Belt_001

1

Reel cutter drive belt

2

Bolt

3

Flexible wire housing

Engine Tension Belt

Caution

Be sure to stop the engine before adjusting
the belts.

Tilt the underseat cover forward and open
the cover.
Open the hood.
Press the middle of the belt with your finger
to check the belt tension.

1

i352yo-001

Engine Tension Belt_001

1

Engine tension belt

4.

1.

2.
3.

Maintenance

LM315GC

Maintenance

Page 5-13

Maintenance (Main Body)

Содержание LM315GG












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды