Baroness LM315GG, Руководство по эксплуатации для владельца

Страница: 66 / 75

Remove the bolts.
1
75uxaw-005
Rear Tires_002
1 Bolt
Remove the tire from the wheel mounting
base.
Caution
Refer to the Tightening Torque Table.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Tighten the bolts in the tightening order
(crosswise).
For installing the rear tires, reverse the
removing procedure.
[3WD]
Securely place the jack beneath the jack-up
points of the engine mount frame area, and
then raise it until the tire lifts off the ground.
(See "Jack-up Points" (Page 5-5) .)
Remove the wire.
Remove right/left the bolt A(s).
Remove the bolt B at the center.
Remove the brake shoe Assy.
Remove the brake drum.
2
1
3
4
5
75uxaw-005
Rear Tires_003
5.
6.
1.
2.
3.
4.
5.
6.
1 Wire
2 Bolt A
3 Bolt B
4 Brake shoe Assy
5 Brake drum
Remove the bolts.
1
75uxaw-005
Rear Tires_004
1 Bolt
Remove the tire from the wheel mounting
base.
Caution
Refer to the Tightening Torque Table.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Tighten the bolts in the tightening order
(crosswise).
For installing the rear tires, reverse the
removing procedure.
Adjustment of Belt Tension
Caution
Be sure to stop the engine before adjusting
the belts.
Important
Make sure that the belt has the specified
amount of tension.
If the belt becomes slack due to frequent use, it
may jump or slip.
7.
8.
LM315GC
Maintenance
Page 5-12 Maintenance (Main Body)