Baroness LM315GG, Руководство по эксплуатации для владельца

Страница: 41 / 75

Important
Rough minimum cutting height is for the
height of the average green.
If the green undulation is hard, set it a
litter bit higher in order not to damage the
green surface.
2
1
33i8xn-001
Cutting Height and Thickness of Bed Knife (Bottom Blade)_001
1 Bed knife (Bottom blade)
2 Thickness of Blade
Adjustment of Cutter Adjustment Spring
If the diameter of the reel cutter (cutting cylinder)
becomes smaller, adjust the cutter adjustment
spring.
Adjust the blade engagement.
Loosen the pipe with cutter adjusting screw,
and then adjust the length of the spring coil
to approximately 26.0 mm (1.024 in).
A
1
tv9pml-002
Adjustment of Cutter Adjustment Spring_001
1 Pipe with cutter adjusting screw
A 26.0 mm (1.024 in)
*
1.
2.
Procedure to Start / Stop Engine
Start / Stop of Engine
Procedure to Start Engine
Warning
Before starting the engine, make sure that
there are no other people or obstacles around
the machine.
Important
Starter operation must take 15 seconds or
less.
If the engine does not start, stop using the
battery for 30 to 60 seconds to avoid
exhausting the battery.
Open the fuel cock.
The fuel cock is located beneath the fuel
tank.
1
2
3
B
A
v2e27i-012
Procedure to Start Engine_001
1 Fuel tank
2 Fuel cock
3 Fuel filter
A ON (Open)
B OFF (Close)
Sit on the seat.
Make sure that the parking brake is applied.
1.
2.
3.
Handling Instructions
LM315GC
Handling Instructions
Page 4-21 Procedure to Start / Stop Engine