Baroness LM315GG, Руководство по эксплуатации для владельца

Страница: 25 / 75

For details on changing coolant, please refer to
the separate Engine Operating Manual.
Coolant quantity, including the reserve tank, is
3.0 dm
3
(3.0 L).
Hydraulic Oil
Inspection of Hydraulic Oil
Raise the mower units and maintain that
position on a level surface.
Make sure that the oil level is at the middle
of the oil gauge.
1
olekci-005
Inspection of Hydraulic Oil_001
1 Oil gauge
Check underneath the machine for oil
leakage.
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
If the oil level is low, open the tank cap and
supply oil.
1
2
dmhzyz-009
Hydraulic Oil Supply_001
1.
2.
3.
1.
1 Tank cap
2 Oil gauge
Tighten the tank cap securely.
Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
Move forward and reverse repeatedly
several times.
Raise the mower units and maintain that
position on a level surface, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
Check underneath the machine for oil
leakage.
Change of Hydraulic Oil
Warning
When you change the hydraulic oil, be sure to
drain it into a bowl and discard it in
accordance with local laws and regulations.
Caution
If the oil emulsifies or if it becomes even
slightly less transparent, change the oil
immediately.
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
Follow the steps below to remove the old
oil.
Start the engine, warm the oil, then lower
the mower units on a level surface and
stop the engine.
Remove the drain plug of the hydraulic
tank and drain the old oil into a bowl.
2.
3.
4.
5.
1.
[1]
[2]
Handling Instructions
LM315GC
Handling Instructions
Page 4-5 Inspection Before Use