Baroness LM315GG, Руководство по эксплуатации для владельца

Страница: 46 / 75

Light Switch
The light switch (option) is located in the
operation panel.
Flip the switch forward to turn the light on, and
backward to turn the light off.
1
bnec97-005
Light Switch_001
1 Light switch
Throttle Lever
The throttle lever is located in the operation
panel and enables you to adjust the engine rpm.
Move the throttle lever toward "High" (the rabbit
icon) to increase the engine rpm, and toward
"Low" (the turtle icon) to reduce the rpm.
Note:
The factory default engine rpm (maximum) is set
to 3,000 rpm.
1
A
B
ef6hsk-007
Throttle Lever_001
1 Throttle lever
A High
B Low
Mower Pedal
Caution
Do not keep depressing the mower pedal
after an operation.
It may cause malfunction.
1
6yy3b4-004
Mower Pedal_001
1 Mower pedal
The mower pedal is located at the left side of
foot of the operator seat. Depressing the pedal
switches the mower unit position between Up
and Down.
When it switches to Down position, the green
LED lamp at the right side of the mower pedal
turns on.
The Up/Down speed of the mower unit is
affected by the engine rotation speed. When the
engine rotation is at low speed, the Up/Down
speed is at low as well.
Important
Even if the reel rotation switch is set to "ON"
(rotation) position, when the mower units are
raised, the reel cutter (cutting cylinder) stops
rotating.
Important
The operation with the mower pedal cannot
raise the mower unit to the highest position.
For traveling, keep pressing the up switch to
raise the mower unit to the highest position.
LM315GC
Handling Instructions
Page 4-26 Operation of Each Section