Barco CORONIS 1MP, Инструкция по установке и эксплуатации

Страница: 85 / 167

BarcoMed Driver Tab Single Source Master
86
Configuring the DualView or Windows NT desktop
Display Resolution
Under Windows NT 4.0 all displays connected to all of the
BarcoMed controller(s) installed in the system must have the
same resolution settings.
Under Windows 2000 and Windows XP both displays connected
to a single BarcoMed controller must have the same resolution
settings in order to be attached to the desktop.
Examples (your resolution settings may be different):
OK to use:
Display 1 2480 x 2560 @ 59 Hz
Display 2 2480 x 2560 @ 59 Hz
Not OK to use
Display 1 2480 x 2560 @ 59 Hz
Display 2 2560 x 2480 @ 59 Hz
The following options maybe set individually on each Barco
display even if they are connected to the same BarcoMed
controller:
Palette Mode
Drawing Mode
Disable 10-bit grayscale
Note: If the second display connected to any given BarcoMed
controller is not attached to the desktop when you set the
Palette Mode, Drawing Mode, etc. of the attached display, the
second display will inherit the properties of the first display
when you attach it to the desktop.