Barco CORONIS 1MP, Инструкция по установке и эксплуатации

Страница: 100 / 167

Single Source Master Barco DPMS Screen Saver
101
day, the display is set to one of the DPMS states (Stand-By,
Suspend, or Off) by the display controller during user inactivity.
Screen Saver During Work Day
On LCD based displays, such as the Barco C
ORONIS
displays, it is not
necessary to invoke a screen saver as there is no CRT phosphor to
preserve. However, one can extend the life of the backlight in the
LCD display, in addition to realizing great power savings, during
period of user inactivity by quickly entering the Off state. We
recommend setting the work day to be as short as possible to get
the maximum power savings on C
ORONIS
displays.
Available Savers
Lists the Available Screen Savers.
Settings
Changes settings for the selected screen saver.
DPMS Settings After Work Day
If you have an display controller that supports DPMS calls, then
you will be able to set the DPMS Settings for after the work day.
Otherwise, a text box will be displayed telling you why DPMS
functions are not available.
Amount of Time in each DPMS State
After the work day, the display will be placed into one of the
following DPMS Power States: Stand-By, Suspend, or Off. The
default setting is for the display to directly go into the Off State
and spend no time in the Stand-By or Suspend states. If the user
wishes to go into the Stand-By or Suspend states before going
into the Off state, select the required amount of time for each
state.