Barco CORONIS 1MP, Инструкция по установке и эксплуатации

Страница: 42 / 167

Windows NT 4.0 BarcoMed C
ORONIS
software installation
43
2. By default all the software on the BarcoMed Software CD will
be selected (figure 15 below). For the initial installation we
recommend that you install all of the software. If you do not
want to install a particular BarcoMed Software product,
deselect it by clearing the checkbox next to it. When you
have finished selecting the BarcoMed Software you wish to
install, click
“Install” on the Wizard’s Welcome Screen to
continue or “Cancel” to exit the wizard.
Figure 15
Driver installation
3. Click “Next” on the Display Driver Wizard’s Welcome Screen
to continue or “Cancel” to exit the Display Driver Wizard and
return to the Software Install Wizard.
4. The Device Selection Screen (figure 16 on page 44) shows
the devices supported by the driver on the CD. Under
Windows NT the wizard does not detect the physical
hardware installed in the computer. Since Windows NT
supports only one type of video device at a time, you may
choose only one type of device to install. After you have
selected the device you want to install, click
“Next” .