Barco CORONIS 1MP, Инструкция по установке и эксплуатации

Страница: 102 / 167

Single Source Master Barco DPMS Screen Saver
103
schemes are separated into two kinds, DEFAULT (global) and
PRIVATE (personal).
Upon installation, three default settings schemes are installed
and no private settings schemes are installed.
Default settings schemes are visible to all users of the system.
However, they can be modified only by users with administrator
privileges. If a user who does not have administrator privileges
tries to save a scheme using an existing default scheme name,
an error message is displayed saying “you must have
administrator rights to modify a default scheme.” If an
administrator saves a scheme using an existing default scheme
name, a message is displayed to tell the user that the
modification is saved to a default scheme and will be visible to
all users. If the administrator saves a scheme using a new name,
then the user is asked if the scheme should be saved as a default
scheme or a private scheme. Since there is no distinction
between how a default scheme and a private scheme is
displayed, it is highly recommended that the user uses a
different naming convention to distinguish the two (i.e. use
“DEFAULT: ...” for default schemes).
Private schemes are personal. They are not shared and are
visible only to the users who created them. All users of a system,
including those who do not have administrator privileges, can
create, modify or delete private schemes. When the delete
button is pressed, the user is asked to confirm the delete
request.
Using the Barco DPMS Screen Saver
Using the Barco DPMS Screen Saver is similar to using any other
Windows Screen Saver, each user of the system must select the
Barco DPMS Screen Saver so that Windows will store the
selection in the user’s profile. If a user does not select the Barco