![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150015.webp)
Installation guidelines
3-4
5976065 BARCOCINE 8 08022000
Removing the top cover
During some installations, it will be convenient to remove the top cover from the projector totally.
Proceed as follows :
•
Pivot the top cover backwards 90° (fully extended);
•
Push carefully the top cover to the left side (viewing from the rear of the projector) until the hinges are disengaged. This can
be facilitated by pressing downwards on the spring tabs next to the hinges. Slide the top cover off the projector.
Reinstalling the top cover
To reinstall the top cover on the projector :
•
Place the top cover in front of the hinges (as shown in the picture) and push in the direction of the black arrow until the cover
locks into the hinges;
•
Pivot the top cover to close;
•
Secure the locking screw by turning it clockwise with a screwdriver.
Scan Inversion
What has to be done ?
The scan switches must be placed in the correct position which corresponds to the desired scanning configuration.
To change the scanning, it is necessary to remove the projector top cover and to open the protection plate.
For opening the projector's top cover, see 'Access to controls'.
Turn off the projector and unplug the power cord before changing the scan direction.