![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150020.webp)
Projector setup
4-2
5976065 BARCOCINE 8 08022000
1
2
3
4
5
6
7
8
0
1
OFF ON
Switch No
Value
1
128
2
64
3
32
4
16
5
8
6
4
7
2
8
1
Addressable with RCU
Addressable with PC, MAC
or workstation
0
9
255
Setting the projector address
The projector's address may be set to any value between 0 and 255.
When the address is set, the projector can be controlled now by :
•
RCU for addresses between 0 and 9.
•
IBM PC (or compatible) or Apple MAC for addresses between 0 and 255.
Setting the address is a hardware SETUP of your projector which must be done during installation. Use the 8 DIP switches provided
on the controller board labelled 'Projector Address'.
Each DIP switch has its own decimal value. The sum of the values associated to those DIP switches gives the address. As shown
in the table, if Switch No. 1 is set to ON, it represents a decimal value of 128, Switch No.2 for 64, Switch No.3 for 32, and so forth.
In the given example, the projector address is set to
202 :
DIP switch No.
:
1 2 3 4 5 6 7 8
Position ON/OFF
:
1 1 0 0 1 0 1 0
Sum : 1x128 + 1x64 + 0x32 + 0x16 + 1x8 + 0x4 + 1x2 + 0x1 = 202
Factory preset address = 0
Note :