![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150013.webp)
Installation guidelines
3-2
5976065 BARCOCINE 8 08022000
Where to install the projector ?
To indicate a correct installation position it is necessary to know :
•
The distance from projector to ceiling in case of Ceiling mounted or the distance from projector to floor in case of Table mounted;
•
The distance from projector to screen.
$
&'
3'
%
6FUHHQ
3URMHFWRU
&HLOLQJ
6FUHHQZLGWK
6:
)URQWYLHZ
7RSYLHZ
•
Install the projector water levelled in both directions
•
Install the projector perpendicular to the screen
To find the correct position for the BARCO CINE8, equipped with HD8 lenses, use the following formulas:
PD[inch] = 1.269 x SW[inch] + 13.54
A[inch] = 0.12 x SW[inch] - 11.11
PD[m] = 1.269 x SW[m] + 0.344
A[cm] = 12 x SW[m] - 28.2
Abbreviations used in the calculations and the drawings :
B = Distance between ceiling and top of the screen (Ceiling mounted) or distance between floor and bottom of the screen (Table
mounted).
A = Correction Value, extra value to be added to B to obtain the correct installation position (In some cases the A value can be negative).
CD = Total distance between projector and ceiling (Ceiling mounted) or total distance between projector and floor (Table mounted).
CD = A + B.
Ceiling Mounted : when the result is negative, enlarge the distance between ceiling and top of the screen, mount screen lower,
until CD becomes zero or positive.
Table Mounted : when the result is negative, enlarge the distance between floor and bottom of the screen, mount screen
higher, until CD becomes zero or positive.
SW = Screen width.
PD = Perpendicular distance between screen and projector's mount.