![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150036.webp)
Installation adjustment mode
7-2
5976065 BARCOCINE 8 10022000
$
&'
3'
%
6FUHHQ
3URMHFWRU
&HLOLQJ
6FUHHQZLGWK
6:
)URQWYLHZ
7RSYLHZ
A = Correction value
PD= Perpendicular distance between screen and projector
SW= Screen width
Installation
Raster Centering
Projector Distance
Optical Lens Focusing
Scheimpflug Adjustment
CRT Projection Angle Adjustment
Adjustment Mode
Overview flowchart of the Installation Adjustment Mode
Important : Access to adjustments
The top cover of the projector should be removed in order to gain access to the adjustments.
Please refer to chapter 'Installation Guidelines' for how to remove the top cover.
Projector Distance
What can be done ?
On the screen, a drawing will be displayed together with parameters indicating a correct installation position.
How to calculate the screen width ?
To change the screen width :
1
Push the cursor keys
ç
or
è
to highlight the item
SW in the "Projector Distance 1" menu (menu 1)
2
Press TEXT.
After TEXT is pressed, the "Projector Distance 2" menu will be displayed on the screen (menu 2).
It allows the user to change the Screen width.
3
Push the cursor keys
ç
or
è
to highlight the digit needed to be changed, and enter the desired digit with the numeric keys on
the RCU or the local keypad.
4
Press ENTER to confirm the changes.
The projector will redisplay the "Projector Distance 1" menu with updated values for the three parameters.
5
Press ENTER to continue with the "Optical Lens Focusing".
If EXIT is pressed, the projector will return to the previous menu.
The same applies to the PD (projector distance). You can use the above-mentioned procedure to obtain a correct updated value
of SW (screenwidth) after entering a new value of PD (projector distance).
SW = 2.6 m
PD= 3.64m
A=12 cm
Select with arrow keys; <TEXT> to reprogram
<ENTER> to continue; <EXIT> to return.
WARNING: ONLY FOR STANDARD PROJECTORS !!
SCREENWIDTH =
2
, 6 0 m
Select with arrow keys; reprogram with numeric keys and
then <ENTER> to confirm.
Maximum screenwidth = 6 m
Maximum proj. distance = 8,1 m.
menu 2
menu 2