![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150044.webp)
Appendix A: G2 adjustment
A-2
5976065 BARCOCINE 8 10022000
When selecting the G2 adjustment menu, these green LEDs must be out. If not, follow the procedure below to adjust the G2:
1
Open the second metal cover by turning out the retaining screws on both sides and pivot the cover to the front side of the projector
2
Adjust the G2 potentiometers (see Photo 3) very slowly with a plastic tweaker until the LED of the corresponding amplifier just
stops illuminating. Repeat the adjustment for the other colors;
3
After the three G2 potentiometers have been correctly adjusted, close both metal covers and secure with the retaining screws.
Red potentiometer
Blue potentiometer
Green potentiometer
Photo 3
After finishing the adjustments :
Press ENTER to continue with the
"SERVICE" menu.
Press EXIT to return to the
"SERVICE" menu.
Press ADJUST to return to Operational mode.