![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150034.webp)
Connections
6-8
5976066 BARCOCINE 8 10022000
Set up of the Baud Rate for Communication with a Computer.
See 'Change Baudrate PC' in chapter 'Service mode'
21
2))
P OWE R / MA INS
SHULSKHUDOV
5
*
% &RPS+6\QF 96\QF
COMM. PO RT
P ORT 3
PO RT 4/5
9QRP
,QRP
)UHT
6H HLQVWDOODWLRQLQV WUXFWLRQVEH IRUHFRQQHFWLQJWRWKH V XSSO\
9RLUODQRWLFHGLQVWDOODWLRQDYDQWGHUDFFRU GHU DXUpVHDX
9
$PS
+]
69,'(2
2))21
2KP
9,'(2
JUHHQRSHUDWLRQ
UHGVWDQGE\
PO RT 2
P ORT 1
2))21
2KP
P ROJECTOR MODE
7KLVGHYLFHFRPSOLHVZ LWKSD UWRI
WKH)&&UXOHV2SHUDWLRQLVVXEMHFWWR
IROORZ LQJWZ RFRQGLWLRQV 7KLV
GHYLFH PD \QRWFDXVHKDUPIXOLQWHU
IHUHQFHDQG WKLVGHYLFH PXVW
DFF HSWDQ\ LQWHUIHUHQF HUH FHLYHG
LQFOXGLQJLQWHUIHUH QFHWKDWPD \FDXVH
XQGHV LUHGRSHUDWLRQ
56
FRQQHFWLRQ
Communication port for communication with peripherals
Connecting a RCVDS 05 switcher to the projector.
-
Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers
are linked via the expansion modules.
-
Serial communication with the projector.
-
Remote control buttons on the RCVDS to control the projector (source selection and analog settings)
-
The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with a LED on
the rear.
For more information about the use of the RCVDS 05, consult the Owner's Manual.
Connecting a VS05 switcher to the projector.
The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and 1 RGB analog or component Video source to the
projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
Order number : R9827890.
For more information about the use of the VS05, consult the Owner's Manual.
Connecting an IR Remote Receiver to the projector.
This infrared receiver unit makes it possible to control the projector from another room.
There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU
can now be sent to the IR Remote Receiver.
The IR Remote Receiver displays the selected source on a 7-segment display.