![background image](http://html1.mh-extra.com/html/barco/cine-8/cine-8_manual_3991150040.webp)
Installation adjustment mode
7-6
5976065 BARCOCINE 8 10022000
Scheimpflug Adjustment (Diagonal image focusing)
What can be done ?
With the diagonal image focusing corrections, it is possible to obtain uniform focus for the total projected image.
These corrections must be repeated for each color. The Diagonal image focusing is repeated 3 times, first for green, then for red
and then for blue.
How to adjust ?
First, be sure that the CRT projection angle is correctly adjusted, otherwise it is not possible to obtain proper overall focus of the
image.
1
Press ENTER to start the green adjustment.
2
Press EXIT to return to CRT Projection Angle Adjustment.
3
Press ADJUST to return to Operational mode.
Adjustment procedure :
Example : diagonal focusing of the green image.
Equalize diagonally the focus from left (bottom) to right (top) by turning screw 01 of the projected color.
Equalize now diagonally the focus from left (top) to right (bottom) by turning screw 00 located under the green lens.
Repeat the same procedure for the red and blue image using the corresponding screws.
To optimize the image focusing, repeat the optical lens focusing.
',$*21$/,0$*()2&86,1*
<ENTER> to continue
<EXIT> to return
1. TURN THE SCREW MARKED 01
TO FOCUS THE IMAGE DIAGO-
NALLY from LEFT (bottom) TO
RIGHT (top).
2. TURN THE SCREW MARKED 00
TO FOCUS THE IMAGE DIAGO-
NALLY from LEFT (top) TO RIGHT
(bottom)
%/8(
*5((1
5('
GREEN
00
01
RED
02
03
BLUE
04
05
Left
Right
Left
Right