background image

Thank you for purchasing this Panasonic product.

 

The Operating Instructions correspond to the firmware’s main version 2.00 and higher.

 

This manual is common to all the models regardless of suffixes of the Model No.

 

z

for Taiwan

BA: Black model, the standard zoom lens supplied

 

z

for India

BD: Black model, the standard zoom lens supplied   

LBD: Black model, the lens sold separately

 

z

for Korea

B: Black model, the standard zoom lens supplied   

W: White model, the standard zoom lens supplied

 

z

for Asia (except for Taiwan, India, Korea) / Oceania / Africa

BA/B: Black model, the standard zoom lens supplied   

LBA/LB: Black model, the lens sold separately

WA/W: White model, the standard zoom lens supplied    LWA/LW: White model, the lens sold separately

 

z

for other countries or regions

B: Black model, the standard zoom lens supplied   

LB: Black model, the lens sold separately

W: White model, the standard zoom lens supplied   

LW: White model, the lens sold separately

 

Before operating this product, please read the instructions carefully and save this manual 

for future use.

 

Before using this product, be sure to read “Read this first!” (

x

 pages 5 to 16).

DPQP1239ZE/X1

DLP™ Projector  

Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. 

PT-RZ120

Summary of Contents for PT-RZ120LBU7





























































































































































































































Reviews: