A151 Benchtop Conductivity Meter
3
Installing the Electrode Holder
Take out the electrode holder from the packaging. Turn the meter over. Align the base plate of the electrode holder with the circular holes on the meter.
Moderately tighten two screws.
Adjustment of electrode arm
After installation, if the electrode arm automatically rises or falls, you need to adjust the screw until arm locate at any position.
1.
Remove the plastic cover from the electrode arm.
2.
Use the screwdriver to tighten the screw moderately.
3.
Insert the plastic cover to previous position. Installation is completed.
Connecting the Electorde
1.
Take out the conductivity electrode from the packaging. Follow the steps below to place the electrode into left or right side of the electrode arm.
1. Insert the electrode
2. Hook up the cable
3. Hook up the cable
