A151 Benchtop Conductivity Meter
9
Password
The password protection is used to prevent the unauthorized calibration and settings. If enabled, the user must enter the 4-digit password to access the
calibration or setup menu. If the setting value is 0000, the password protection will invalid.
Unlock or Reset the password
Press and hold the
key in the measurement mode, the password input window immediately shows on the display and wait for entering the correct digits.
Press the
or
key to input the password, press the
Enter
key to confirm. Once you have successfully entered the setup menu, selecting the
“
Disable
”
.
The password will be removed.
Factory Reset
The Factory Reset will restore the meter back to factory default settings. If enabled, all of the calibration data and selected options/parameters will be lost
or reset, the meter must be recalibrated. During the setting process, when the display shows
“Ar
e you sure you want to reset the meter
?”, press the
Enter
key, the meter will immediately restore the factory settings, press the
ESC
key to cancel.
