Bante900P Portable Multiparameter Water Quality Meter
1
Introduction
Thank you for selecting the Bante900P portable multiparameter water quality meter. This manual provides a step-by-step guide to help you operate the
meter, please carefully read the following instructions before use.
Unpacking the Meter
Before unpacking, ensure that the current work environment meet following conditions.
●
Relative humidity is less than 80%.
●
Ambient temperature is greater than 0
o
C and less than 60
o
C.
●
No potential electromagnetic interference.
The following list describes the standard accessories of the meter. After the unpacking, please check all accessories are complete. If any are damaged or
missing, please contact nearest distributor.
ACCESSORIES:
●
pH Electrode
●
Conductivity Electrode
●
Dissolved Oxygen Probe
●
Temperature Probe
●
pH Buffer Pouches (pH4.01, 7.00, 10.01)
●
Conductivity Calibration Solutions (84µS/cm, 1413µS/cm, 12.88mS/cm)
●
DO Electrolyte Solution
●
DO Membrane Cap
●
Batteries
pH Electrode
Conductivity Electrode
Dissolved Oxygen Probe
Temperature Probe
DO Membrane Cap
AA Batteries
pH Buffer Pouches
Conductivity Calibration Solutions
DO Electrolyte Solution
DO
Electrolyte
Solution