Bante900P Portable Multiparameter Water Quality Meter
38
pH Measurement
1. Press MODE key until the meter shows
indicator.
2. Rinse the pH electrode with distilled water to remove any impurities adhering to the probe body.
3. Dip the electrode into the sample solution, stir the sensor gently.
4. Wait for the reading to stabilize, record the measured value on the display.
ORP Measurement
Bante900P portable meter contains two millivolt measurement modes.
ABSOLUTE MILLIVOLT MODE:
●
Press MODE key until the display shows measurement unit “mV”, the meter is now enters absolute millivolt measurement mode.
RELATIVE MILLIVOLT MODE:
●
Press MODE key until the display shows
indicator, the meter enters relative millivolt measurement mode.
Select one of the above modes. Dip the ORP electrode into sample solution, stir the sensor gently. Wait for the reading to stabilize, record the measured
value on the display.
mV
