Bante900P Portable Multiparameter Water Quality Meter
9
Calibration Points:
Select the number of calibration points.
2 points
●
3 points
4 points
5 points
Ion Valence:
Select the ion valence of sensor.
Monovalent
●
Divalent
CONDUCTIVITY/TDS/SALINITY/RESISTIVITY MODES:
PARAMETER
DESCRIPTION
OPTIONS
DESCRIPTION
DEFAULT
Cell Constant:
Select the cell constant of conductivity electrode.
K=0.1
K=1
●
K=10
User-Defined
Temperature Coefficient:
Select the temperature coefficient of sample.
Setting Range: 0.0 to 10.0%/
o
C
2.10
Calibration Points:
Select the number of calibration points.
1 point
●
2 points
3 points
4 points
5 points
Pure Water Coefficient:
Pure water coefficient will be calculated and applied
automatically for ultra pure water measurement if
enabled.
Enable
Disable
●
Normalization Temperature:
Sets the normalization temperature for conductivity
measurement and calibration.
25
o
C
●
20
o
C
TDS Factor:
Sets the default TDS conversion factor.
Setting Range: 0.40 to 1.00
0.5
Measurement Unit:
Sets the default temperature unit.
Degrees Celsius
●
Degrees Fahrenheit
