Bante900P Portable Multiparameter Water Quality Meter
31
Conductivity Calibration Report
This program lets you check the calibration factor of the conductivity electrode.
1. Press MR key in the conductivity measurement mode, the display shows “LOC/P-01”.
2. Press
or
key until the meter shows “ELE/P-02” (Electrode Diagnosis).
3. Press ENTER key to confirm, the meter shows the last calibration date (Format: mm-dd).
4. Press
key, the meter shows calibration point and calibration factor (e.g., K=0.998).
5. After the browsing, press MEAS key to exit the current mode.
MR
MR
MR
……... Calibration Point
...…... Calibration Factor
