BANLAW PRODUCT DATA SHEET
RESTRACK ADVANCED CONTROLLER
Doc ID: PRH-FMG-21 Version: 1.0
Page
5
of
20
Please ensure you have the latest version of this document.
Figure 6: Advanced Controller Naming Convention and Example Plate showing
Options “1342”
BFTAC Options:
COUNTRY
SPECIFICATION
1. AUSTRALIA
Controller wired to
Australian standards and
practice
AS/NZS 3000:2018
Banlaw’s Advanced Controllers are
configured using reputable
components that meet the
appropriate standards for the
location of installation.
2. US
Controller wired to US
standards (using UL489
Certified Equipment) and
practice
CARD READER
1. NONE
Not required
Based on site requirements and
preferences
2. CARDAX
Gallagher Cardax reader
installed
3. HID
HID PROXPRO reader
installed
NUMBER OF
FTPs
1. 1. off
One Fluid Transfer Point
interface
Installed FTPs are based upon the
number of devices that are
supervised by the Advanced
Controller
.
Devices include nozzles*, pumps, ball
valves, tank level monitoring options.
*iButton reader provides a ‘touch’ input
for a registered fluid user.
2. 2. off
Two Fluid Transfer Point
interfaces
3. 3. off
Three Fluid Transfer Point
interfaces
4. 4. off
Four Fluid Transfer Point
interfaces
TANK
GAUGING
1. NO
Tank Gauging not required
Tank gauging is configured to
monitor up to 6 tank levels or 3 tanks
with level and temperature
compensation. Most Hart 2-wire
devices can be used.
2. YES
Tank Gauging Enabled
