BANLAW PRODUCT DATA SHEET
RESTRACK ADVANCED CONTROLLER
Doc ID: PRH-FMG-21 Version: 1.0
Page
11
of
20
Please ensure you have the latest version of this document.
4.
PRINCIPLES OF OPERATION
The ResTrack
system itself can be fully “automated” and requires no manual operation or manipulation.
Whether using a Banlaw ResTrack Advanced Controller system or a Banlaw classic depot, the installation of
the Advanced Controller requires
no change to the normal operating procedure of the dry-break and splash-
fill refuelling system
(i.e. the procedure by which a tank is normally refuelled).
The following process illustrates a typical operating sequence for a
MANUAL
fuel transaction, refuelling a
unit with the Banlaw ResTrack Advanced controller.
Equipment that is damaged, leaking or otherwise unfit
for operation must not be used
. Maintenance should be carried out to replace or repair faulty parts prior to
use of a diesel refuelling system.
4.1
Manual Transaction - Dispensing
To initiate a manual transaction please press the "Manual" icon on the screen:
Figure 7: Manual mode button
The screen will change to the following:
Figure 8: Manual Transaction Screen
Using the keypad, enter the unit ID and PIN number and press the "done" key then the "Next" key. If all the
details are entered correctly the next step is to choose a nozzle. Select the 1 or 2 Nozzle.
For more information please refer to the ResTrack
Controller Operator’s Manual and
User’s Manual.
For more information to How to use your Banlaw Nozzle please refer to the Nozzle
documents.
