B&R Automation Panel 5000 Скачать руководство пользователя страница 156

Страница: 156 / 216

Installation and wiring

156

Automation Panel 5000 User's manual V2.11

5.5.6 Removing the VESA mounting unit

The following requirements must be met:

•

All connected cables must be disconnected.

•

The Automation Panel must no longer be installed on the VESA bracket.

1. Disconnect the power supply cable to the Automation Panel (disconnect the power cable!). Disconnect from

all sources and poles!

2. Carry out electrostatic discharge at the ground connection.
3. Place the Automation Panel on a clean, flat surface.
4. Remove the 4 Torx screws (T25: 4x M5x10) and 2 metal pieces (designed for the cable strain relief clip) used

to install the mounting unit on the panel.

5. Pull evenly to remove the mounting unit from the panel.

Содержание Automation Panel 5000

























































































































































































































Результаты поиска

Содержание Automation Panel 5000

Отзывы:

B&R Automation Panel 5000, Руководство пользователя, Страница: 156 / 216

Результаты поиска

Содержание Automation Panel 5000

Отзывы: