Bandit
Copyright 1/07
PAGE 8
MODEL 3400T
CORRECTING HYDRAULIC PROBLEMS
COMPONENT
PROCEDURE
Checking for
1. Do not attempt to check your hydraulic pump without first consulting your
defective pump
local dealer or Bandit Industries.
Checking for
1. If everything checks out as correct, it may be time to check the
defective motor
hydraulic motor.
2. Do not attempt to check your hydraulic pump without first consulting your
local dealer or Bandit Industries.
NOTE:
When returning hydraulic components for warranty make sure to box up all warranted parts to avoid
additional damage while shipping.
Do not disassemble any hydraulic components which are to be warranted.
Anything which has been disassembled or tampered with will not be warranted. Items being returned must be
clean. All hydraulic components must have all hosing ports plugged. Failure to plug ports will allow debris to
enter components which will void warranty.
HYDRAULIC SECTION
BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE DISENGAGE CLUTCH, TURN OFF ENGINE, WAIT
FOR THE CUTTER WHEEL TO COME TO A COMPLETE STOP, INSTALL THE CUTTER WHEEL LOCK
PIN, DISCONNECT BATTERY, AND MAKE SURE THE IGNITION KEY IS IN YOUR POSSESSION.
NOTE:
In cold weather situations let the hydraulic system idle for approximately 15 minutes to allow the system
to warm up to operating temperature. Running cold oil through the hydrostatic motor can raise case drain
pressures and damage shaft seals.
Содержание 3400T
Страница 44: ...Bandit Copyright 1 07 PAGE 44 MODEL 3400T NOTE Parts may not be exactly as shown UPPER FRAME COMPONENTS...
Страница 46: ...Bandit Copyright 1 07 PAGE 46 MODEL 3400T NOTE Parts may not be exactly as shown CUTTER WHEEL COMPONENTS...
Страница 48: ...Bandit Copyright 1 07 PAGE 48 MODEL 3400T NOTE Parts may not be exactly as shown FRAME COMPONENTS...
Страница 56: ...Bandit Copyright 1 07 PAGE 56 MODEL 3400T SERVICE RECORD DATE DESCRIPTION AMOUNT SERVICE RECORD...
