B&G Vulcan Series, Руководство оператора

Страница: 70 / 198

Menu options let you use different methods for setting the port and
starboard start line ends. You can
ping
them, set them at cursor
position, specify coordinates, and set one based on the setting of
the other. You can also edit waypoints to create start line end
points. After the ends are set you can
nudge
each end to move them,
if needed.
The menu options to set the port and starboard start line end points
are available in both the Chart panel and the Race panel.
Setting start line end points by pinging
Setting the start line end points by pinging requires maneuvering
the boat to each end of the start line and then pinging.
Ú
Note:
Before setting the start line position using the ping
method, it is important that the Bow off set is updated to
negate the difference between the GPS position and the bow
of the vessel.
1.
Approach the port end of the start line.
2.
When the boat reaches the port end of the start line, open the
menu and select
Start Line
,
Port end
, and then
Ping port
. The
port end mark on the start line panel becomes solid red,
indicating it is set.
3.
Approach the starboard end of the start line.
4.
When the boat reaches the starboard end of the start line, open
the menu and select
Start Line
,
Starboard end
, and then
70
Race panel | Vulcan Series Operator Manual