B&G Vulcan Series, Руководство оператора

Страница: 100 / 198

particular chart or radar panel in the same manner as dual radar
described in
"Selecting the radar source"
on page 98.
Ú
Note:
Some controls that are related to physical properties of
the radar itself are not independent of source. These are Fast
Scan, Antenna Height and Bearing alignment.
MARPA is fully independent and up to 10 targets may be tracked for
each virtual radar source.
Up to two independent Guard Zones may also be defined for each
virtual radar source.
Using the cursor on a radar panel
By default, the cursor is not shown on a radar panel.
When you position the cursor on the radar panel, the cursor
position window is activated and the cursor menu options are
displayed.
To remove the cursor and cursor elements from the panel, select
Clear cursor
or press the
X
key.
GoTo cursor
You can navigate to a selected position on the image by positioning
the cursor on the panel, then using the
Goto Cursor
option in the
menu.
The cursor assist function
The cursor assist function allows for fine tuning and precision
placement of the cursor without covering details with your finger.
Activate the cursor on the panel, then press and hold your finger on
the screen to switch the cursor symbol to a selection circle,
appearing above your finger.
Without removing your finger from the screen, drag the selection
circle to the desired position.
When you remove your finger from the screen the cursor reverts to
normal cursor operation.
Saving waypoints
You can save a waypoint at a selected location by positioning the
cursor on the panel, and then selecting the new waypoint option in
the menu.
100
Radar | Vulcan Series Operator Manual