![background image](http://html1.mh-extra.com/html/bandg/vulcan-series/vulcan-series_operators-manual_3077545107.webp)
You can reset the EBL/VRM center to vessel position from the menu.
Setting a guard zone around your vessel
A guard zone is an area (either circular or a sector) that you can
define on the radar image. When activated, an alarm alerts you
when a radar target enters or exits the zone.
Defining a guard zone
1.
Ensure that the cursor is not active
2.
Activate the menu, select
Guard zones
, then select one of the
guard zones
3.
Select the shape for the zone
- The adjustment options depend on the guard zone shape
4.
Select
Adjust
to define the settings for the guard zone. The
values can be set from the menu or by dragging on the radar
panel.
-
A
: Bearing, relative to the vessel heading
-
B
: Depth
-
C
: Range, relative to vessel center
-
D
: Width
5.
Select the save option in the menu to save your settings.
When positioned, you can turn the guard zones on/off by selecting
the relevant section on the data bar.
C
B
A
D
Shape: Sector
B
C
Shape: Circle
Alarm settings
An alarm is activated when a radar target breaches the guard zone
limits. You can select if the alarm is activated when the target enters
or exits the zone.
Radar
| Vulcan Series Operator Manual
107
Содержание Vulcan Series
